First Commit With My Files

flake.lock

@@ -0,0 +1,48 @@
+{
+  "nodes": {
+    "home-manager": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1714931954,
+        "narHash": "sha256-QXpLmgmisNK2Zgpnu9DiO9ScrKJuJ4zmiMTNpObVIuk=",
+        "owner": "nix-community",
+        "repo": "home-manager",
+        "rev": "3dfe05aa9b5646995ace887931fa60269a039777",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "repo": "home-manager",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1714635257,
+        "narHash": "sha256-4cPymbty65RvF1DWQfc+Bc8B233A1BWxJnNULJKQ1EY=",
+        "owner": "nixos",
+        "repo": "nixpkgs",
+        "rev": "63c3a29ca82437c87573e4c6919b09a24ea61b0f",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nixos",
+        "ref": "nixos-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "home-manager": "home-manager",
+        "nixpkgs": "nixpkgs"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}

flake.nix

@@ -0,0 +1,31 @@
+{
+  description = "Nixos config flake";
+
+  inputs = {
+    nixpkgs.url = "github:nixos/nixpkgs/nixos-unstable";
+
+    home-manager = {
+      url = "github:nix-community/home-manager";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+  };
+
+  outputs = { self, nixpkgs, ... }@inputs: {
+    nixosConfigurations = {
+			default = nixpkgs.lib.nixosSystem {
+				specialArgs = {inherit inputs;};
+				modules = [
+					./hosts/default/configuration.nix
+					inputs.home-manager.nixosModules.default
+				];
+			};
+			kim = nixpkgs.lib.nixosSystem {
+				specialArgs = {inherit inputs;};
+				modules = [
+				  ./hosts/kim/configuration.nix
+					inputs.home-manager.nixosModules.default
+				];
+			};
+    };
+  };
+}

hosts/default/configuration.nix

@@ -0,0 +1,143 @@
+# Edit this configuration file to define what should be installed on
+# your system.  Help is available in the configuration.nix(5) man page
+# and in the NixOS manual (accessible by running ‘nixos-help’).
+
+{ config, pkgs, inputs, ... }:
+
+{
+  imports =
+    [ # Include the results of the hardware scan.
+      ./hardware-configuration.nix
+      inputs.home-manager.nixosModules.default
+    ];
+
+  # Bootloader.
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = true;
+
+  networking.hostName = "kim"; # Define your hostname.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Enable networking
+  networking.networkmanager.enable = true;
+
+  # Set your time zone.
+  time.timeZone = "America/New_York";
+
+  # Select internationalisation properties.
+  i18n.defaultLocale = "en_US.UTF-8";
+
+  i18n.extraLocaleSettings = {
+    LC_ADDRESS = "en_US.UTF-8";
+    LC_IDENTIFICATION = "en_US.UTF-8";
+    LC_MEASUREMENT = "en_US.UTF-8";
+    LC_MONETARY = "en_US.UTF-8";
+    LC_NAME = "en_US.UTF-8";
+    LC_NUMERIC = "en_US.UTF-8";
+    LC_PAPER = "en_US.UTF-8";
+    LC_TELEPHONE = "en_US.UTF-8";
+    LC_TIME = "en_US.UTF-8";
+  };
+
+  nix.settings.experimental-features = [ "nix-command" "flakes" ];
+
+  # Enable the X11 windowing system.
+  services.xserver.enable = true;
+
+  # Enable the KDE Plasma Desktop Environment.
+  services.displayManager.sddm.enable = true;
+  services.xserver.desktopManager.plasma5.enable = true;
+
+  # Configure keymap in X11
+  services.xserver.xkb = {
+    layout = "us";
+    variant = "";
+  };
+
+  # Enable CUPS to print documents.
+  services.printing.enable = true;
+
+  # Enable sound with pipewire.
+  sound.enable = true;
+  hardware.pulseaudio.enable = false;
+  security.rtkit.enable = true;
+  services.pipewire = {
+    enable = true;
+    alsa.enable = true;
+    alsa.support32Bit = true;
+    pulse.enable = true;
+    # If you want to use JACK applications, uncomment this
+    #jack.enable = true;
+
+    # use the example session manager (no others are packaged yet so this is enabled by default,
+    # no need to redefine it in your config for now)
+    #media-session.enable = true;
+  };
+
+  # Enable touchpad support (enabled default in most desktopManager).
+  # services.xserver.libinput.enable = true;
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+  users.users.annika = {
+    isNormalUser = true;
+    description = "Annika Merris";
+    extraGroups = [ "networkmanager" "wheel" ];
+    packages = with pkgs; [
+      kate
+    #  thunderbird
+    ];
+  };
+
+  home-manager = {
+    extraSpecialArgs = { inherit inputs; };
+    users = {
+      "annika" = import ./home.nix;
+    };
+  };
+
+  # Install firefox.
+  programs.firefox.enable = true;
+
+  # Allow unfree packages
+  nixpkgs.config.allowUnfree = true;
+
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  environment.systemPackages = with pkgs; [
+    vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+    wget
+    discord
+  ];
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Enable the OpenSSH daemon.
+  services.openssh.enable = true;
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It‘s perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+  system.stateVersion = "23.11"; # Did you read the comment?
+
+}

hosts/default/hardware-configuration.nix

@@ -0,0 +1,39 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "nvme" "xhci_pci" "ahci" "usbhid" "usb_storage" "sd_mod" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-amd" ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/ba4362a3-3a0b-4227-b460-a5a9302f5966";
+      fsType = "ext4";
+    };
+
+  fileSystems."/boot" =
+    { device = "/dev/disk/by-uuid/DB88-8E65";
+      fsType = "vfat";
+      options = [ "fmask=0022" "dmask=0022" ];
+    };
+
+  swapDevices = [ ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp6s0.useDHCP = lib.mkDefault true;
+  # networking.interfaces.wlp5s0.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.amd.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}

hosts/default/home.nix

@@ -0,0 +1,76 @@
+{ config, pkgs, ... }:
+
+{
+  # Home Manager needs a bit of information about you and the paths it should
+  # manage.
+  home.username = "annika";
+  home.homeDirectory = "/home/annika";
+
+  # This value determines the Home Manager release that your configuration is
+  # compatible with. This helps avoid breakage when a new Home Manager release
+  # introduces backwards incompatible changes.
+  #
+  # You should not change this value, even if you update Home Manager. If you do
+  # want to update the value, then make sure to first check the Home Manager
+  # release notes.
+  home.stateVersion = "23.11"; # Please read the comment before changing.
+
+  # The home.packages option allows you to install Nix packages into your
+  # environment.
+  home.packages = [
+    # # Adds the 'hello' command to your environment. It prints a friendly
+    # # "Hello, world!" when run.
+    # pkgs.hello
+
+    # # It is sometimes useful to fine-tune packages, for example, by applying
+    # # overrides. You can do that directly here, just don't forget the
+    # # parentheses. Maybe you want to install Nerd Fonts with a limited number of
+    # # fonts?
+    # (pkgs.nerdfonts.override { fonts = [ "FantasqueSansMono" ]; })
+
+    # # You can also create simple shell scripts directly inside your
+    # # configuration. For example, this adds a command 'my-hello' to your
+    # # environment:
+    # (pkgs.writeShellScriptBin "my-hello" ''
+    #   echo "Hello, ${config.home.username}!"
+    # '')
+  ];
+
+  # Home Manager is pretty good at managing dotfiles. The primary way to manage
+  # plain files is through 'home.file'.
+  home.file = {
+    # # Building this configuration will create a copy of 'dotfiles/screenrc' in
+    # # the Nix store. Activating the configuration will then make '~/.screenrc' a
+    # # symlink to the Nix store copy.
+    # ".screenrc".source = dotfiles/screenrc;
+
+    # # You can also set the file content immediately.
+    # ".gradle/gradle.properties".text = ''
+    #   org.gradle.console=verbose
+    #   org.gradle.daemon.idletimeout=3600000
+    # '';
+  };
+
+  # Home Manager can also manage your environment variables through
+  # 'home.sessionVariables'. These will be explicitly sourced when using a
+  # shell provided by Home Manager. If you don't want to manage your shell
+  # through Home Manager then you have to manually source 'hm-session-vars.sh'
+  # located at either
+  #
+  #  ~/.nix-profile/etc/profile.d/hm-session-vars.sh
+  #
+  # or
+  #
+  #  ~/.local/state/nix/profiles/profile/etc/profile.d/hm-session-vars.sh
+  #
+  # or
+  #
+  #  /etc/profiles/per-user/annika/etc/profile.d/hm-session-vars.sh
+  #
+  home.sessionVariables = {
+    # EDITOR = "emacs";
+  };
+
+  # Let Home Manager install and manage itself.
+  programs.home-manager.enable = true;
+}

hosts/kim/configuration.nix

@@ -0,0 +1,144 @@
+# Edit this configuration file to define what should be installed on
+# your system.  Help is available in the configuration.nix(5) man page
+# and in the NixOS manual (accessible by running ‘nixos-help’).
+
+{ config, pkgs, inputs, ... }:
+
+{
+  imports =
+    [ # Include the results of the hardware scan.
+      ./hardware-configuration.nix
+      inputs.home-manager.nixosModules.default
+    ];
+
+  # Bootloader.
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = true;
+
+  networking.hostName = "kim"; # Define your hostname.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Enable networking
+  networking.networkmanager.enable = true;
+
+  # Set your time zone.
+  time.timeZone = "America/New_York";
+
+  # Select internationalisation properties.
+  i18n.defaultLocale = "en_US.UTF-8";
+
+  i18n.extraLocaleSettings = {
+    LC_ADDRESS = "en_US.UTF-8";
+    LC_IDENTIFICATION = "en_US.UTF-8";
+    LC_MEASUREMENT = "en_US.UTF-8";
+    LC_MONETARY = "en_US.UTF-8";
+    LC_NAME = "en_US.UTF-8";
+    LC_NUMERIC = "en_US.UTF-8";
+    LC_PAPER = "en_US.UTF-8";
+    LC_TELEPHONE = "en_US.UTF-8";
+    LC_TIME = "en_US.UTF-8";
+  };
+
+  nix.settings.experimental-features = [ "nix-command" "flakes" ];
+
+  # Enable the X11 windowing system.
+  services.xserver.enable = true;
+
+  # Enable the KDE Plasma Desktop Environment.
+  services.displayManager.sddm.enable = true;
+  services.xserver.desktopManager.plasma5.enable = true;
+
+  # Configure keymap in X11
+  services.xserver.xkb = {
+    layout = "us";
+    variant = "";
+  };
+
+  # Enable CUPS to print documents.
+  services.printing.enable = true;
+
+  # Enable sound with pipewire.
+  sound.enable = true;
+  hardware.pulseaudio.enable = false;
+  security.rtkit.enable = true;
+  services.pipewire = {
+    enable = true;
+    alsa.enable = true;
+    alsa.support32Bit = true;
+    pulse.enable = true;
+    # If you want to use JACK applications, uncomment this
+    #jack.enable = true;
+
+    # use the example session manager (no others are packaged yet so this is enabled by default,
+    # no need to redefine it in your config for now)
+    #media-session.enable = true;
+  };
+
+  # Enable touchpad support (enabled default in most desktopManager).
+  # services.xserver.libinput.enable = true;
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+  users.users.annika = {
+    isNormalUser = true;
+    description = "Annika Merris";
+    extraGroups = [ "networkmanager" "wheel" ];
+    packages = with pkgs; [
+      kate
+    #  thunderbird
+    ];
+  };
+
+  home-manager = {
+    extraSpecialArgs = { inherit inputs; };
+    users = {
+      "annika" = import ./home.nix;
+    };
+  };
+
+  # Install firefox.
+  programs.firefox.enable = true;
+
+  # Allow unfree packages
+  nixpkgs.config.allowUnfree = true;
+
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  environment.systemPackages = with pkgs; [
+    vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+    wget
+    discord
+    git
+  ];
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Enable the OpenSSH daemon.
+  services.openssh.enable = true;
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It‘s perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+  system.stateVersion = "23.11"; # Did you read the comment?
+
+}

hosts/kim/hardware-configuration.nix

@@ -0,0 +1,39 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "nvme" "xhci_pci" "ahci" "usbhid" "usb_storage" "sd_mod" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-amd" ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/ba4362a3-3a0b-4227-b460-a5a9302f5966";
+      fsType = "ext4";
+    };
+
+  fileSystems."/boot" =
+    { device = "/dev/disk/by-uuid/DB88-8E65";
+      fsType = "vfat";
+      options = [ "fmask=0022" "dmask=0022" ];
+    };
+
+  swapDevices = [ ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp6s0.useDHCP = lib.mkDefault true;
+  # networking.interfaces.wlp5s0.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.amd.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}

hosts/kim/home.nix

@@ -0,0 +1,85 @@
+{ config, pkgs, ... }:
+
+{
+  nixpkgs.config.allowUnfree = true;
+  # Home Manager needs a bit of information about you and the paths it should
+  # manage.
+  home.username = "annika";
+  home.homeDirectory = "/home/annika";
+
+  # This value determines the Home Manager release that your configuration is
+  # compatible with. This helps avoid breakage when a new Home Manager release
+  # introduces backwards incompatible changes.
+  #
+  # You should not change this value, even if you update Home Manager. If you do
+  # want to update the value, then make sure to first check the Home Manager
+  # release notes.
+  home.stateVersion = "23.11"; # Please read the comment before changing.
+
+  # The home.packages option allows you to install Nix packages into your
+  # environment.
+  home.packages = [
+    # # Adds the 'hello' command to your environment. It prints a friendly
+    # # "Hello, world!" when run.
+    # pkgs.hello
+
+    # # It is sometimes useful to fine-tune packages, for example, by applying
+    # # overrides. You can do that directly here, just don't forget the
+    # # parentheses. Maybe you want to install Nerd Fonts with a limited number of
+    # # fonts?
+    # (pkgs.nerdfonts.override { fonts = [ "FantasqueSansMono" ]; })
+
+    # # You can also create simple shell scripts directly inside your
+    # # configuration. For example, this adds a command 'my-hello' to your
+    # # environment:
+    # (pkgs.writeShellScriptBin "my-hello" ''
+    #   echo "Hello, ${config.home.username}!"
+    # '')
+  ];
+
+  # Home Manager is pretty good at managing dotfiles. The primary way to manage
+  # plain files is through 'home.file'.
+  home.file = {
+    # # Building this configuration will create a copy of 'dotfiles/screenrc' in
+    # # the Nix store. Activating the configuration will then make '~/.screenrc' a
+    # # symlink to the Nix store copy.
+    # ".screenrc".source = dotfiles/screenrc;
+
+    # # You can also set the file content immediately.
+    # ".gradle/gradle.properties".text = ''
+    #   org.gradle.console=verbose
+    #   org.gradle.daemon.idletimeout=3600000
+    # '';
+  };
+
+  # Home Manager can also manage your environment variables through
+  # 'home.sessionVariables'. These will be explicitly sourced when using a
+  # shell provided by Home Manager. If you don't want to manage your shell
+  # through Home Manager then you have to manually source 'hm-session-vars.sh'
+  # located at either
+  #
+  #  ~/.nix-profile/etc/profile.d/hm-session-vars.sh
+  #
+  # or
+  #
+  #  ~/.local/state/nix/profiles/profile/etc/profile.d/hm-session-vars.sh
+  #
+  # or
+  #
+  #  /etc/profiles/per-user/annika/etc/profile.d/hm-session-vars.sh
+  #
+  home.sessionVariables = {
+    # EDITOR = "emacs";
+    SUDO_EDITOR = "vim";
+  };
+
+  programs.vscode = {
+    enable = true;
+    extensions = with pkgs.vscode-extensions; [
+      # OK, I have nothing for now.
+    ];
+  };
+
+  # Let Home Manager install and manage itself.
+  programs.home-manager.enable = true;
+}